Search found 7 matches
- Mon Aug 13, 2018 5:37 pm
- Forum: Midland
- Topic: Programming a 70-1495B
- Replies: 1
- Views: 11320
Re: Programming a 70-1495B
These guys are about the only ones that I know of that sell them. These cables are about 50 bucks with shipping. Unless you have more than one radio to program, sometimes the programming cable is worth more than the radio itself. https://rfguys.com/collections/programming-cables?page=2 Scroll down t...
- Sat Jun 30, 2018 3:58 pm
- Forum: Midland
- Topic: XTR programming question
- Replies: 0
- Views: 9140
XTR programming question
I recently picked up a nice XTR with the model number of 70-1342B-MM. Does anyone know if this radio is narrowband capable? I saw in another thread that maybe MM models are. The FCC ID number is AK5701342BMM and a search of the Part 90 database lists this model as capable of both 16K0F3E and 11K0F3E...
- Tue Jun 07, 2016 4:22 pm
- Forum: RELM/Regency/Wilson
- Topic: Relm RMV800 tx problem
- Replies: 1
- Views: 10428
Re: Relm RMV800 tx problem
Just a follow up on this. I went ahead and bought a new PA module from a Chinese vendor and installed it. That seemed to cure the problem. I think the reason the original PA failed was because there was a problem with the threads on the SO-239 antenna coax connector and it wasn't allowing the PL-259...
- Thu May 12, 2016 11:17 pm
- Forum: RELM/Regency/Wilson
- Topic: Relm RMV800 tx problem
- Replies: 1
- Views: 10428
Relm RMV800 tx problem
I bought an RMV800 vhf radio cheap that has a strange problem. When the radio is first turned on, it transmits just fine. It puts out close to 50 watts. Then after the radio is on for about 5-10 minutes and you key the mic, the red light comes on but the transmit wattage drops to zero. If you are li...
- Mon Aug 31, 2015 5:30 pm
- Forum: Kenwood Commercial Products
- Topic: TK-862H problems
- Replies: 3
- Views: 9623
Re: TK-862H problems
I purchased a new kpg-4 cable made by an American company and the problem is solved! I can read and write to the radios now with no problem. Thanks again for the help.
- Tue Aug 25, 2015 3:36 pm
- Forum: Kenwood Commercial Products
- Topic: TK-862H problems
- Replies: 3
- Views: 9623
Re: TK-862H problems
Thanks for the reply k2hz. I have been using a generic kpg-4 cable that works fine on a tk-880 that I have, but this is the first time I have tried using it on a tk-862. I'll see if I can get my hands on a genuine kpg-4 and see if that will make a difference.
- Mon Aug 24, 2015 9:42 am
- Forum: Kenwood Commercial Products
- Topic: TK-862H problems
- Replies: 3
- Views: 9623
TK-862H problems
I have three TK-862H radios that I can't seem to read or write to using the kpg-29d software. All I get is the Error!! Check connections message. I am using a kpg-4 cable that I have used with success on other radios, so I know it's not the cable. I am using the software on a couple of old windows 9...