Search found 94 matches
- Tue Oct 02, 2012 8:47 am
- Forum: Harris Public Safety Communications (PSPC) Equipment
- Topic: In-cabinet repeat, Mastr 3
- Replies: 4
- Views: 12111
Re: In-cabinet repeat, Mastr 3
looking for this info or any info on making a MIII repeat in the cabinet. I toggle thru the repeater tab in options and only get none or back-to-back repeat options ?
- Wed Mar 14, 2012 11:45 am
- Forum: Icom Commercial Radios
- Topic: Icom F80DS Firmware Update? MDC?
- Replies: 2
- Views: 8470
Re: Icom F80DS Firmware Update? MDC?
Current firmware is 2.8
you will also need Cloning 2.2 Software after the firmware update.
you will also need Cloning 2.2 Software after the firmware update.
- Wed Mar 14, 2012 11:40 am
- Forum: Icom Commercial Radios
- Topic: Icom F3s
- Replies: 2
- Views: 8689
Re: Icom F3s
Correct it is a dos program. It will not work with a USB adapter. You need a 9 pin for it to work correctly
- Wed Mar 14, 2012 11:36 am
- Forum: Vertex
- Topic: VXR-7000 on Ham
- Replies: 1
- Views: 5768
VXR-7000 on Ham
A friend of mine has a VXR7000 UHF 450-470 Mhz that was donated to use on the local ham club. He was able to program it via the windows software fine, but now only has 700 MW output power. Is there a tunign procedure that needs to be done to get it to work on the ham bands ?
- Sun Jan 09, 2011 6:04 pm
- Forum: Icom Commercial Radios
- Topic: IC-F320-S-6 and Narrow Band
- Replies: 2
- Views: 10889
- Sun Jan 09, 2011 6:02 pm
- Forum: Icom Commercial Radios
- Topic: F521 scan setup help
- Replies: 5
- Views: 11356
Re: F521 scan setup help
Push and hold your scan button. Once it beeps then select up and down to get to the right scan list. Then hold scan till it beeps again and you are in that scan list
- Sat Oct 24, 2009 7:55 pm
- Forum: Kenwood Commercial Products
- Topic: TK-240
- Replies: 0
- Views: 3633
TK-240
OK, Dust off your cob webs. I found a old TK-240 portable in my SAR stuff. Originally this portable was programmed by jumpering 2 pins on the rear of the unit under a small cover. Well needless to say somone used a knife (as it was probably the easiest) and the rear panel is no longer able to get in...
- Wed Oct 21, 2009 8:55 am
- Forum: Midland
- Topic: Titan Programming issues
- Replies: 0
- Views: 6651
Titan Programming issues
I am having issues programming/reading some titan radios. I purchased all the software and cables from Midland a few years ago. Programmed the radios originally and all was fine. Went to change some things and cannot read any of them. I have 1 UHF low power dash mount, 1 VHF low power dash mount and...
- Tue Oct 20, 2009 3:08 pm
- Forum: EF Johnson (now part of JVCKenwood)
- Topic: EFJ 5100- needs servicing
- Replies: 1
- Views: 4083
- Thu Sep 24, 2009 2:27 pm
- Forum: Icom Commercial Radios
- Topic: IC-F121 Power on beep
- Replies: 4
- Views: 10751
Re: IC-F121 Power on beep
delete power on text.
- Thu Jul 02, 2009 10:06 am
- Forum: Icom Commercial Radios
- Topic: icom ic-f33gs from an non mdc to a mdc portable
- Replies: 3
- Views: 9911
Re: icom ic-f33gs from an non mdc to a mdc portable
The original radio was not capable of MDC signalling. You can try changing the model on the radio and write one channel to it. I'm guessing it is an early version and will not take it. If it is the early version you cannot change it to MDC.
- Sat Jun 27, 2009 8:17 am
- Forum: Icom Commercial Radios
- Topic: 2821 mobile 450-520 down to 440
- Replies: 3
- Views: 9311
Re: 2821 mobile 450-520 down to 440
I had the VHF version of this radio and had numerous ham frequencies in the radio. I also have 3 different flavors of ICOM UHF Mobiles with HAM freqs, including the 521, 221, and 420. I am assuming yes.
- Sat Jun 27, 2009 8:17 am
- Forum: Icom Commercial Radios
- Topic: 2821 mobile 450-520 down to 440
- Replies: 3
- Views: 9311
Re: 2821 mobile 450-520 down to 440
I had the VHF version of this radio and had numerous ham frequencies in the radio. I also have 3 different flavors of ICOM UHF Mobiles with HAM freqs, including the 521, 221, and 420. I am assuming yes.
- Sat Jun 27, 2009 8:16 am
- Forum: Icom Commercial Radios
- Topic: 2821 mobile 450-520 down to 440
- Replies: 3
- Views: 9311
Re: 2821 mobile 450-520 down to 440
I had the VHF version of this radio and had numerous ham frequencies in the radio. I also have 3 different flavors of ICOM UHF Mobiles with HAM freqs, including the 521, 221, and 420. I am assuming yes.
- Sat Jun 27, 2009 8:12 am
- Forum: Icom Commercial Radios
- Topic: OPC-966 Programming Cable Schematics??????
- Replies: 1
- Views: 8196
Re: OPC-966 Programming Cable Schematics??????
ICOM uses a RIB type circuit in the programming cable. It is not a easy cable to rebuild.