Search found 27 matches

by ve1bxk
Fri Mar 06, 2015 9:37 pm
Forum: Vertex
Topic: CE7 on 10 meters
Replies: 2
Views: 1687

Re: CE7 on 10 meters

I did just that a few years ago, but I had to order and install the low split low band VCO unit to make it work, but it did setup all ok .

73,
Lorne
by ve1bxk
Fri Mar 06, 2015 9:27 pm
Forum: Vertex
Topic: VX-3000V 2 Meters?
Replies: 2
Views: 771

Re: VX-3000V 2 Meters?

Just a follow up regarding the Vertex VX-3000V 50 watt radio. The radio will program from 134 - 174 MHz and works well in the 144-148 MHz range. This one I picked up on EBay I programmed for 145.010 MHz (packet) with a receiver SINAD of 0.17 uv with TX power adjustable via CE19D software to 50 watts...
by ve1bxk
Fri Feb 20, 2015 10:23 pm
Forum: Vertex
Topic: VX-3000V 2 Meters?
Replies: 2
Views: 771

VX-3000V 2 Meters?

Just wanted to know if the VX-3000V radio will program and function ok in the 144-148 MHz range?

73, Lorne
by ve1bxk
Wed Apr 18, 2012 10:02 pm
Forum: Vertex
Topic: VXR-9000 to UHF Ham Band
Replies: 7
Views: 7336

Re: VXR-9000 to UHF Ham Band

You have to go into dealer mode (-d ) and goto the alignment section tweak the RX TUNE lowest to highest frequency range and then write to it.
If you want, send me an email and I will create a code file for your frequency.

73, Lorne
VE1BXK
by ve1bxk
Wed Apr 18, 2012 9:50 pm
Forum: Vertex
Topic: CE20 Programming
Replies: 5
Views: 4200

Re: CE20 Programming

You have to use an DOS 6.22 or win95/98 (in dos mode) for the software can communicate properly to the com port.
73, Lorne
VE1BXK
by ve1bxk
Wed Apr 27, 2011 7:16 pm
Forum: Vertex
Topic: VXR-7000
Replies: 4
Views: 3286

Re: VXR-7000

I have a VXR-7000U unit programmed in the 70 cm band and works finest kind.
73, Lorne
VE1BXK
by ve1bxk
Wed Apr 27, 2011 7:14 pm
Forum: Vertex
Topic: VXR-9000U Reference Freq Adjust
Replies: 8
Views: 3778

Re: VXR-9000U Reference Freq Adjust

What frequency are you programmed for?
by ve1bxk
Sun Dec 26, 2010 7:18 pm
Forum: Icom Commercial Radios
Topic: Icom IC-M710 HF Marine SSB
Replies: 0
Views: 3336

Icom IC-M710 HF Marine SSB

I have worked on these radios in the past, but never had the chance to try them on the HAM Bands. Has anyone got one to work the HAM Bands? I have heard they will do 1.6 -30 Mhz AM/USB-LSB/RTTY/CW.
I see a few on Ebay listings ...

Lorne
VE1BXK :roll:
by ve1bxk
Wed Oct 07, 2009 10:45 am
Forum: Harris
Topic: RF-3200 Password Access
Replies: 0
Views: 3125

RF-3200 Password Access

RF-3200 Password Access Formula:

(serial # x serial #) + 42747 = (password #)

For unit with S/N's in the high 2000's:

(serial # x serial #) + 42747 - 8388608 = (password #)

serial # = S/N of the radio[/b]

Cheers!
by ve1bxk
Tue Sep 01, 2009 12:23 pm
Forum: Vertex
Topic: VXR-9000 to UHF Ham Band
Replies: 7
Views: 7336

Re: VXR-9000 to UHF Ham Band

Send me your email, I have the file ready to go 400.000 - 512.000! :grin:

Lorne VE1BXK

mailto:ve1bxk@ns.sympatico.ca
by ve1bxk
Thu Jan 01, 2009 11:52 pm
Forum: Vertex
Topic: FTl-1011H 99ch CE& software help
Replies: 1
Views: 1088

Re: FTl-1011H 99ch CE& software help

Yes I have done it, but in involves changing the VCO in the unit. I obtained them right from Vertex directly. You will have to of course align the receiver etc. I did it to a 4 channel FTL-1011H and worked fine. Part number CA0632001 (29.7 - 39 Mhz VCO ) 25 Khz spacing. It is very tricky removing th...
by ve1bxk
Mon Jul 14, 2008 1:23 pm
Forum: Vertex
Topic: 99ch FTL-1011 on 10 meters?
Replies: 7
Views: 2988

Re: 99ch FTL-1011 on 10 meters?

Yes I have done it, but in involves changing the VCO in the unit. I obtained them right from Vertex directly. You will have to of course align the receiver etc. I did it to a 4 channel FTL-1011H and worked fine. Part number CA0632001 (29.7 - 39 Mhz VCO ) 25 Khz spacing. It is very tricky removing th...
by ve1bxk
Mon May 15, 2006 1:59 pm
Forum: Vertex
Topic: FTL-1011 Convert B to A
Replies: 0
Views: 975

FTL-1011 Convert B to A

I have FTL-1011 B version 36-50 Mhz and I want to change it to a
A Version (29.7-36 Mhz). Does anyone have the change specs for the VCO so I can change components and realign for the low split?
by ve1bxk
Tue Feb 14, 2006 12:55 pm
Forum: Vertex
Topic: FTL-7011 squelch setting
Replies: 4
Views: 1964

This of course is an internal Tech adjustment and not intended for a end User adjusment, hence the need to " Get it Corrrect " the first time no matter who uses the radio the squelch is at a Fixed set point.
:eeek:
by ve1bxk
Wed Jan 25, 2006 8:38 pm
Forum: Vertex
Topic: FTL-1011 Low Band
Replies: 2
Views: 1602

Uhmm ok where can I get the updated version from Dave?

Lorne VE1BXK