Search found 7 matches

by midstate33
Fri Mar 25, 2011 10:49 pm
Forum: Vertex
Topic: Distorted Receive Audio On VX-510L
Replies: 0
Views: 4810

Distorted Receive Audio On VX-510L

I have a Vertex VX-510L operating on 46 Mhz frequency, the problem is when I turn the volume up (over 50%) of the volume control it distorts to the point you can't understand it, I tried a new external speaker mic and it acts the same way so I think the speaker is OK in the radio, next I tried repla...
by midstate33
Tue May 25, 2010 4:39 pm
Forum: Vertex
Topic: VX-510 Programming issues
Replies: 1
Views: 3857

Re: VX-510 Programming issues

When you plug the cable in does the 510 go into the programming mode ok, or is there an error or e message on the display, email me at midstatecommunications@verizon.net I will try & help you get things going, I have hundreds of these in service, is it a factory programming cable or a homebrew c...
by midstate33
Thu Mar 04, 2010 9:08 pm
Forum: Vertex
Topic: VX4200 VHF to VX4200 UHF link/"Super Rat Pak"
Replies: 1
Views: 3850

Re: VX4200 VHF to VX4200 UHF link/"Super Rat Pak"

Well if anyone is interested in this setup, we figured it out after......extensive correspondense with Vertex techs & engineer who said it would not work, if your interested let me know & I will give you the info....you ask what would I need with this??? Think about it you have a Uhf 4200 an...
by midstate33
Fri Feb 05, 2010 1:28 am
Forum: Vertex
Topic: VX4200 VHF to VX4200 UHF link/"Super Rat Pak"
Replies: 1
Views: 3850

VX4200 VHF to VX4200 UHF link/"Super Rat Pak"

Anyone interface two VX4200's one VHF one UHF to make a duplex link, we got everything working fine....except....we need a way to (via the front panel of one of the radios) disconnect the link so the radios can be used in the "normal" mode, any help from "gurus" is appreciated, t...
by midstate33
Fri Feb 05, 2010 1:20 am
Forum: Vertex
Topic: COR/receive indication from VX-4204
Replies: 1
Views: 3919

Re: COR/receive indication from VX-4204

Pin 10
by midstate33
Fri Apr 07, 2006 7:32 pm
Forum: Vertex
Topic: Vertex VX6000 LB to VX4000U How to remotely change channels
Replies: 0
Views: 3141

Vertex VX6000 LB to VX4000U How to remotely change channels

We have a lowband VX6000 programmed to 3 channels, this is linked with a UHF VX4000 works great on a single freq but when we try to use a Vega control panel to provide a ground on the appropriate pin of the VX6000 d sub connector to switch to another channel (tone is received via UHF VX4000, the CAS...
by midstate33
Wed Feb 01, 2006 11:09 pm
Forum: Icom Amateur Radio Forum
Topic: Icom V82 Handheld
Replies: 0
Views: 6619

Icom V82 Handheld

:eeek: OK Bought the Icom V82 VHF version, purchased the software, modified the radio for out of band operation (Yea I know), proceeded to program the radio with no problems except, you cannot use split DTCS on this radio, thought I would just go in the monitor mode on rx only, guess what that doesn...