Search found 69 matches

by fineshot1
Tue Nov 28, 2017 10:46 am
Forum: Kenwood Commercial Products
Topic: Kenwood Radio Model?
Replies: 4
Views: 150

Re: Kenwood Radio Model?

hard to believe there is no info plate on this radio. there is usually one at least in the rear of the transceiver in the heat sink area on one of the outer fins. How about the control head face - is there no model number on that? at the very least take some pics and post them on a yahoo group regar...
by fineshot1
Fri Nov 17, 2017 2:43 pm
Forum: Kenwood Commercial Products
Topic: Kenwood Radio Model?
Replies: 4
Views: 150

Re: Kenwood Radio Model?

Try taking off the top and bottom covers and see if you can find any
identifying numbers. There should be a yahoo group for kenwood so
if you can find any usable info inside the radio try it from that point.
That is about all i can suggest until you find out more.
by fineshot1
Wed Feb 15, 2017 10:24 am
Forum: New to Radio?
Topic: Totally lost.
Replies: 2
Views: 856

Re: Totally lost.

2 meter, 10 meter, and 70cm and similar are references to the wave length of the frequency ranges. The wave length would be from the top of one sine wave crest to the top of the next of the frequency range. Any RF energy is a sine wave and actually a form of AC RF energy. https://en.wikipedia.org/wi...
by fineshot1
Tue Jul 19, 2016 4:04 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: GE MastrII Repeater Station Cage worth?
Replies: 1
Views: 2591

Re: GE MastrII Repeater Station Cage worth?

fineshot1 wrote:Just wondering what the used market brings these days for the VHF=Hi cage and cards but no rf power amplifier?
Came out of service recently and I have a couple of up and coming hamfests and need to sell one.
Bump - someone must have a ballpark idea
by fineshot1
Thu Jun 09, 2016 9:25 pm
Forum: General Chatter
Topic: JetStream JT270M Software
Replies: 2
Views: 4525

Re: JetStream JT270M Software

n5tbu wrote:Jetstream:
Username is jet
Password is 12345678
Thank You Mark

I will try that as soon as i get back to work next week
as time allows
by fineshot1
Sat May 21, 2016 9:48 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: GE MastrII Repeater Station Cage worth?
Replies: 1
Views: 2591

GE MastrII Repeater Station Cage worth?

Just wondering what the used market brings these days for the VHF=Hi cage and cards but no rf power amplifier?
Came out of service recently and I have a couple of up and coming hamfests and need to sell one.
by fineshot1
Tue May 17, 2016 3:53 pm
Forum: General Chatter
Topic: JetStream JT270M Software
Replies: 2
Views: 4525

JetStream JT270M Software

Well - I actually did it! I was skeptical cause i am not a fan of these chinese radios. I loaded up the programming software on my desktop with windows 7 and when attempting to start the software it asks me for a user name and password. I looked around the common files and see no text files that wou...
by fineshot1
Thu Jun 04, 2015 4:20 pm
Forum: General Chatter
Topic: Crescend Technologies UHF Amp
Replies: 1
Views: 1398

Re: Crescend Technologies UHF Amp

Not 100% sure but in 1999 there was a series of buyouts and acquasitions that lasted
until about 2005 and somewhere along the line Crescend became Powerwave Technologies, Inc.
by fineshot1
Tue Nov 19, 2013 11:21 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: GE Mastr II base station
Replies: 2
Views: 1196

Re: GE Mastr II base station

You may have a GE MastrII E Base Station that had its own controller mounted on the back in a horizontal manner. Try one of the below websites. Hope that helps. http://hallelectronics.com/getech/b31.htm http://hallelectronics.com/getech/select_search.php3 http://www.repeater-builder.com/rbtip/geinde...
by fineshot1
Wed Feb 06, 2013 9:21 am
Forum: General Chatter
Topic: Suggestion: Catagory for DX Radio Systems
Replies: 1
Views: 2706

Re: Suggestion: Catagory for DX Radio Systems

Same as above for Daniels Electronics

http://www.danelec.com/
by fineshot1
Mon Jan 28, 2013 9:26 am
Forum: General Chatter
Topic: Suggestion: Catagory for DX Radio Systems
Replies: 1
Views: 2706

Suggestion: Catagory for DX Radio Systems

I could not help but notice there is no catagory for DX Radio Systems. They are a pretty good company and offer many types a RF commercial communications radio equipment and the engineering to get started and support. Some of this equipment is starting to show up online on a few of the ham radio and...
by fineshot1
Fri Feb 24, 2012 9:59 am
Forum: Icom Commercial Radios
Topic: IC F60V programming
Replies: 4
Views: 1999

Re: IC F60V programming

Did that. Still cannot edit. it will nuisance delete. Trying to make thes easy to use. i was asked to give out the manuals to our members. What a mistake that was. Created even more confusion. will make call to ICOm tech support. I am not all that familiar with this model and its programing but the...
by fineshot1
Thu Feb 23, 2012 11:24 am
Forum: Icom Commercial Radios
Topic: IC F60V programming
Replies: 4
Views: 1999

Re: IC F60V programming

Been working on radios for 18 years. This ICOM got me stumped. Scan edit is enabled. so how do you edit the scan list?? If our guys have the buttons locked, which a soft key is set up to do, when paged, they have to turn it off, then back on to get out of the lock. did I miss something there?? And ...
by fineshot1
Tue Dec 13, 2011 12:59 pm
Forum: Vertex
Topic: VXR-9000U Reference Freq Adjust
Replies: 8
Views: 3778

Re: VXR-9000U Reference Freq Adjust

stephensworld wrote:Hi,

thank you very much for your fast answer.
Do you know how to modify the D Version to make it possible receiving signals below 440 MHz?

Thanks
Stephan
I am sorry but i have no info on that and do not even know if it is possible.
by fineshot1
Mon Dec 12, 2011 3:19 pm
Forum: Vertex
Topic: VXR-9000U Reference Freq Adjust
Replies: 8
Views: 3778

Re: VXR-9000U Reference Freq Adjust

Hi, I have a VXR-9000 UHF. But I don't get it running in the UHF Ham Band (430-440). The frequencies should be RX 431.350 and TX 438.950. The TX Unit works fine. But the problem is in the RX unit. The lowest frequency I can program is 435.400 MHz. If I set the RX QRG any lower, the receiver doesn't...