The Radio Information Board

Alert tones are enabled on a per-channel basis. There is a check box on the channel programming box that needs to be unchecked to kill them.

I don't think you would have much luck running Aegis through a Quantar. The logic on the Quantar station control module wouldn't know what to do with an Aegis signal. The optimum solution would be to use a GE repeater (Mastr II/III) and a GETC (GE logic shelf). The GETC (with the right modem) would ...

Usually you have to change a chip resistor on the board to change bands. The system board reads the resistor value and sees it as another band. As for moving a 403 band radio to the next split, it won't work. Some will get to 445 MHz by tuning but that differs from radio to radio. The problem is tha...

I can program it (5100) but I'm on the east coast in NC.


Tim

The KVL pinout is as follows:

KVL 5100

2&7 ----------4,5,6,&9
3&8 ----------13
4&9 ----------10
5&10 ---------11


That should make it work according to a post on another board.

Tim