Search found 79 matches
- Wed Sep 14, 2011 12:07 pm
- Forum: Icom Amateur Radio Forum
- Topic: ICOM IC735 Blowing Fuse.
- Replies: 4
- Views: 12751
Re: ICOM IC735 Blowing Fuse.
What 3 amp fuse are you referring to? Where is this fuse located and do you have a schematic diagram? Could be an internally shorted capacitor. Go to IC10 on the PL Unit and check pin 8 to ground. If there is a short it could be C18 or C247. Same procedure for all of the boards - check the 13.8V lin...
- Fri Sep 02, 2011 12:52 pm
- Forum: Kenwood Amateur Radio
- Topic: TM-742A WON'T HOLD MEMORY
- Replies: 1
- Views: 8953
Re: TM-742A WON'T HOLD MEMORY
Old post I know but thought i would just answer it in case anyone else needs to know. The 641/642/741/742/941/942 series use the same lithium back up battery. The Kenwood "East Coast Parts" part number = W09-0573-05 and this battery if it falls close to 3.0 V is just about exhausted and sh...
- Thu Apr 28, 2011 10:42 am
- Forum: Vertex
- Topic: VXR-9000U Reference Freq Adjust
- Replies: 8
- Views: 12397
Re: VXR-9000U Reference Freq Adjust
Its in the 47XMhz range. Why would that matter?ve1bxk wrote:What frequency are you programmed for?
- Mon Apr 18, 2011 6:46 pm
- Forum: General Chatter
- Topic: Bat Board
- Replies: 5
- Views: 13325
Re: Bat Board
No, nothing is different from the one that was always at batboard.batlabs.com. It must be that they blocked the entire dreamhosters.com domain without understanding that there are lots of *.dreamhosters.com sites out there. Sadly there is nothing that I can do to help short of tell you to contact y...
- Mon Apr 18, 2011 8:34 am
- Forum: General Chatter
- Topic: Bat Board
- Replies: 5
- Views: 13325
Re: Bat Board
batboard.dreamhosters.com Does this new board have advertising? It must because I get "it contains content belonging to the category of: Spam " this "blocked" message at work from our Barracuda IT web filter. Seems its being blocked due to some advertisements and I have now way ...
- Wed Mar 23, 2011 8:25 am
- Forum: General Chatter
- Topic: The Radio Information Board Login
- Replies: 5
- Views: 24494
Re: The Radio Information Board Login
ok - i logged into the board this morning with no problems.
thanks alex....
thanks alex....
- Fri Mar 18, 2011 9:09 am
- Forum: General Chatter
- Topic: The Radio Information Board Login
- Replies: 5
- Views: 24494
The Radio Information Board Login
Has something changed on this board lately? Recently I have been trying to login to this board and have been having a tough time even if i get in at all. I keep getting told that I " have exceeded the maximum number of login attempts " and then i get challenged to re-login with one of thos...
- Thu Nov 18, 2010 10:13 am
- Forum: Icom Commercial Radios
- Topic: IDAS & D-STAR, the same or not?
- Replies: 3
- Views: 12048
Re: IDAS & D-STAR, the same or not?
I cant explain in detail but I can tell you they are totally different. DStar is an amateur radio digital interface for voice and data developed by JARL over in Japan. IDAS & NXDN were developed by Icom & Kenwood respectively and were developed for commercial useage as narrow band digital (1...
- Thu Nov 18, 2010 10:00 am
- Forum: Harris Public Safety Communications (PSPC) Equipment
- Topic: Possible?: Mot RIB to Ericsson RIB
- Replies: 4
- Views: 9451
Re: Possible?: Mot RIB to Ericsson RIB
OK - I found it on the hall electronics ge tech web site - see below:
http://www.hallelectronics.com/getech/tq3370.htm
http://www.priceindustries.com/
They claim this adapter is on the price industries web site but i don't see any reference to it on their
unless i missed it somehow.
http://www.hallelectronics.com/getech/tq3370.htm
http://www.priceindustries.com/
They claim this adapter is on the price industries web site but i don't see any reference to it on their
unless i missed it somehow.
- Tue Nov 16, 2010 12:56 pm
- Forum: Harris Public Safety Communications (PSPC) Equipment
- Topic: Possible?: Mot RIB to Ericsson RIB
- Replies: 4
- Views: 9451
Re: Possible?: Mot RIB to Ericsson RIB
Is it possible to convert a Mot RIB to replace the GE/Ericsson TQ3310 or TQ3370? Thanks. I do not remember where I saw it but I have seen reference to an add on adapter for the TQ3370 to make it emulate a standard moto rib(not the smart rib), so it must be possible to go the other way but i have no...
- Wed Sep 08, 2010 8:27 am
- Forum: Vertex
- Topic: VXR-9000U Reference Freq Adjust
- Replies: 8
- Views: 12397
Re: VXR-9000U Reference Freq Adjust
oh great, that is not what i wanted to hear but thank you for this info anyway.rfcom wrote:VERTEX intentionnaly omitted to install some componants on the RF board and this is why frequency can`t be tuned on the VXR-9000 V and U.
- Tue Aug 24, 2010 10:37 am
- Forum: Vertex
- Topic: VXR-9000U Reference Freq Adjust
- Replies: 8
- Views: 12397
VXR-9000U Reference Freq Adjust
Anyone have any experience doing this adjustment procedure on a VXR-9000U ??? I can get into the dealer alignment mode but when in the tab "TX PD Det." I cannot get the "TX PLL Ref Frequency ADJ" to work at all - simply can't get the repeater to key up on any of the tabbed adjust...
- Tue Jun 29, 2010 4:01 pm
- Forum: Harris Public Safety Communications (PSPC) Equipment
- Topic: Harris Unity XG-100 Receiver specs
- Replies: 0
- Views: 4922
Harris Unity XG-100 Receiver specs
Anyone out there in radio land have or can point me to an info source
for the receiver selectivity specs per band on this model?
I have googled and down loaded quite a few pdf docs but all seem to be
absent of this one aspect of receiver specs.
for the receiver selectivity specs per band on this model?
I have googled and down loaded quite a few pdf docs but all seem to be
absent of this one aspect of receiver specs.
- Tue Jun 29, 2010 3:57 pm
- Forum: Harris Public Safety Communications (PSPC) Equipment
- Topic: New to Programmer, need some help
- Replies: 2
- Views: 5210
Re: New to Programmer, need some help
You will need to add to this post which version you have in order to get a decent answer.
- Mon Mar 29, 2010 11:05 am
- Forum: Kenwood Amateur Radio
- Topic: 8 pin mic jack retaining nut tool ????
- Replies: 3
- Views: 10077
Re: 8 pin mic jack retaining nut tool ????
Thanks for the reply, however neither of those two tools in those links will do the job as the hex nut is made of a soft brass metal and with the needle nose pliers i have used i have already done some damage to the 4 slots. In addition this nut sits below the faceplate of the radio in a very narrow...