The Radio Information Board

jsikora wrote:7210002950

What kind of part number is this?Is this for the switch,knob or what?Thank you.

Jordan,TCFD,VFD

The board is more than likely a Transcrypt board.We install them for the DTF(drug task force)into 790's and from what I hear they are registered to that radio and to the person(s) using that radio.Other than that,I can't help you.

Jordan,TCFD,VFD

I need the part number for the volume/on/off switch and the volume knob it's self.We don't have a book on these at the shop.This is a Icom F3-2,says EF Johnson but programs just like the F3 and has the model number F3-2.Thank you.

Jordan,TCFD,VFD

Did you go into "Channel Edit" and set the "PTT ID" to BOT or EOT (or both)? The "Optional Signal" box for each channel only sets up selective calling. In order to do PTT ID, you have to go to the main channel screen, hit "channel edit" and use the PTT ID dro...

hey guys I have 2 Olympian VHF mobiles and both are doing the same thing.........when you unkey the person your talking to hears what sounds like a metallic clank at end of your tranmission does it on everything Ive got programmed in them so its not ONE repeater etc that its doing it on. Im thinkin...

I am trying to setup Fleetsync on my 7160H and am having trouble.I want to have the data burst when I transmit.I can not that that.I have tried everything and it still won't work.I will be getting a 2180 soon and will set it up for Fleetsync as well.I do have the PTT release tone activated,will this...

Are there any current or recent model kenwood handhelds that had public safety style speaker mic's with antenna's on the mic? I was told by my local Kenwood dealer that they were supposedly coming out with a public service mic for the 2180/3180 series.I can't remember if it was a Kenwood OEM mic or...

I have a F-521 and every so often when I leave it on any channel for sometime(be it 5 hours or 5 days)the display will start flashing and I can not receive anything on the channel.I don't believe I can even transmit.It was doing it while it was under warranty,but I did not want to send it in and los...

If it's anything like Kenwood software,then you have to setup a button specially for 2-tone encode.

Jordan,TFD,TCFD,VFD

I had a 521 in my Cherokee.I had a 93 and an 88 Cherokee.The 93 I had it mounted just above the gas pedal,on the lower dash.The 88 I had it mounted to the passenger's side of the console,inline with the gear shift(If in drive).Had no problems either way,I'm 6'3".I have since blown the 93 up(blo...

Are you absolutely dead set on having them on the trunk? You would be much better off to put some on the trunk area, and some on the roof. If you absolutely had to have them all on the trunk, I would put no more than three there, one on either side ('beside' the trunk lid, if you get me) toward the...

I will be receiving my 2000-01(PD selling the car's,unknownm what year I will receive) Crown Victoria Interceptor in the next week or so.I will be mounting a few antenna's on the trunk of the car. I will,at the very basic, have a VHF,CB and scanner antenna.The CB antenna will also be a NMO antenna,n...

Can anyone tell me if the kenwood tk-260 is narrow band capable? I know the 260G is. Thanks, According to my KPG-27D software,running on DOS on WIndows XP,I am not able to change the radio from wide to narrow band.As far as I can tell,the TK-260 is not narrow band capatible.Thank you. Jordan,TFD,TC...

I can not get the scan revert channel to stay at the last channel used.What I want it to do,is when it is scanning and it gets to a channel with traffic,I want it to stop scanning,I want it to go back to the last channel that had traffic,not the one that I started scanning at. In the KPG56D Scan In...

Added a question to my post.