VX-10 XMT/RCV

Forum dedicated to discussion on Vertex Commercial Radio products
Post Reply
User avatar
jim
Posts: 9
Joined: Tue Feb 12, 2002 11:13 pm
Location: Pittsburgh, Pa.

VX-10 XMT/RCV

Post by jim »

I have a VHF VX-10 with no receive audio and VERY low transmit power ( about .3 watts on high power setting). The green light comes on when it receives a signal, but no audio. Also, along with the low RF output, there's no transmit audio.

Is there any particular problem area to look at?
Dave
Posts: 12
Joined: Tue Jan 22, 2002 8:00 pm
Location: Everett, WA

Re: VX-10 XMT/RCV

Post by Dave »

Most problems I encounter with the VX-10 is with the key pad. If you have one from a working radio try swapping the two. Check all the connections and remember, they have a three year warranty.

jim wrote:I have a VHF VX-10 with no receive audio and VERY low transmit power ( about .3 watts on high power setting). The green light comes on when it receives a signal, but no audio. Also, along with the low RF output, there's no transmit audio.

Is there any particular problem area to look at?
Post Reply