Purchased one off ebay. Did not know til i took battery off and wowla.. a ANI-F board.
Can this be programmed through the Programming software, to set ID Number.
Frank N3OBL
FF/EMT
VX900U with ANI-F board
-
- Posts: 50
- Joined: Fri Aug 19, 2005 5:13 pm
- Location: Portland, Oregon
Frank
The ANI-F board is manufactured by Midian - http://www.midians.com - and will need to be programmed outside of the radio with Midian's KL-3 Programmer and the VPI-1 interface. Here's the link to the board page http://www.midians.com/html/specspage.a ... +Signaling
The Cimarron - http://www.cimtechcorp.com - boards can be programmed while they're in the radio using Vertex's CE-73 software. I really like the VMDE-200 because it also decodes, but the ANI-F will does a lot more functions and as a freebie vs $130; heck, that's very COOL.
-Tom
The ANI-F board is manufactured by Midian - http://www.midians.com - and will need to be programmed outside of the radio with Midian's KL-3 Programmer and the VPI-1 interface. Here's the link to the board page http://www.midians.com/html/specspage.a ... +Signaling
The Cimarron - http://www.cimtechcorp.com - boards can be programmed while they're in the radio using Vertex's CE-73 software. I really like the VMDE-200 because it also decodes, but the ANI-F will does a lot more functions and as a freebie vs $130; heck, that's very COOL.
-Tom