VX-2200 programming

Forum dedicated to discussion on Vertex Commercial Radio products
Post Reply
AC1503
Posts: 2
Joined: Tue Mar 24, 2009 7:34 pm

VX-2200 programming

Post by AC1503 »

I have bought a VX-2200 and have fairly successfully programmed it. I can't figure out how to change to a new group when inputting the channels, or be able to select a channel and add it to a group. Also I would like to disable the Dual Watch. Help please!
rfcom
Posts: 12
Joined: Sun Mar 15, 2009 9:46 am

Re: VX-2200 programming

Post by rfcom »

Click on Channel (on the top of the main screen) then on Channel Allocations/Group Alpha Tag to create the other groups needed. These new groups will then become available in the group field of the main screen.
The radio should not go into dual watch mode unless you press on a key already programmed for DW under Common/Key Function.
AC1503
Posts: 2
Joined: Tue Mar 24, 2009 7:34 pm

Re: VX-2200 programming

Post by AC1503 »

Thank you for the information on the group programming function. I thought that Dual Watch was causing some channels to have RX breaks, but it appears to be more squelch related. The squelch is set at 4, is that a normal value?
Post Reply