We have 4 VXR-1000 mobile repeaters, all with the same problem. They will not transmit if the VXR-1000 is picking up a signal, in our case its RFI (RF noise). It should prevent its transmit only if it has a correct CTCSS. Cranking the squelch is not an option (we've tried it anyway and the carrier squelch will open with a noisy signal).
Its been back to Vertex who "fixed it" but the issue still remains. We took a new one from the box and tried it (in case we messed up the programming) and it did the same with the default programming.
If the VXR-1000's mic is set to broadcast on both repeater and mobile radio, if the VXR-1000 squelch is open, it will not transmit on either radio.
We can't find anything in programming or in the service manual to fix this issue.
Anyone have any ideas?
Forum dedicated to discussion on Vertex Commercial Radio products
1 post • Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot] and 1 guest