900 Mhz Ascend

Forum dedicated to discussion on EF Johnson Radio products such as the VP8000, VP6000, VP5000, VM7000, VM6000, radios. Support for Armada software platform.

Moderator: willbartlett

Post Reply
W9DMW
Posts: 1
Joined: Tue May 29, 2012 12:40 pm

900 Mhz Ascend

Post by W9DMW »

Hello to all members of the group,
I am not asking for software here, As I have most of the PC stuff for EF Johnson, What I am asking, Has anyone worked with the Ascend 900 Mhz HT's. Model # 242-5597-562HA4, With a FCC ID of: ATH2425 191.
They are definitely 900 radios, I check with EF Johnson. My question is, Has anyone been able to program and use them in the 900 Mhz Ham Band portion?. If so, Please contact me @ don.w9dmw@gmail.com
Many Thanks, 73's Don W9DMW 8)
btrains
Posts: 11
Joined: Mon Aug 27, 2012 6:00 pm

Re: 900 Mhz Ascend

Post by btrains »

I have purchased two of these radios as well. Looks like PCConfigure will not let you program TX above 900 or RX/TA below 935. This is likely going to require hex editing, but sadly I don't think it will be as straightforward as hex editing Motorola Astro Spectra CPS was to open those radios up to 136-174. Literally all you did with that hex edit was search and replace every instance of "14400000" with "13600000" and then it worked. Unfortunately I am not a programmer so I don't know how to figure this out on my own.
n1oty
Posts: 6
Joined: Sun Aug 02, 2009 5:17 pm

Re: 900 Mhz Ascend

Post by n1oty »

A lot of folks, including myself, have put many of these radio's onto the 900 ham band. They work VERY well. EFJ no longer officially supports these radio's, but the last firmware, PCC and OOB hack to enable OOB programming is located at the P25 Forum:

https://www.p25.ca/forum.php

Search around and you'll also find information concerning hex editing the option file of these radio's to enable/disable many features. I have enabled P25 conventional on three of these radio's thus far.


John
Post Reply