RMV25 Programming

Forum dedicated to discussion on RELM/Regency/Wilson Radio products
Post Reply
bozotexino
Posts: 3
Joined: Tue Jan 10, 2006 2:57 pm

RMV25 Programming

Post by bozotexino »

I just recently acquired a Relm RMV25 mobile tranceiver. I see that the owners manual included in the box is quite skimpy. Also, the programming information that I have found on the Internet seems to be incomplete. Does anyone know of a good source of info on this radio?

Thanks
robson
Posts: 5
Joined: Sat Apr 05, 2008 8:42 pm

Re: RMV25 Programming

Post by robson »

I recently bought a rmv50 and agree about the programming manual, though very similar procedure to the handheld 599A+. I use a pc to program the handhelds, and am trying to do this with the rmv50. Everything works fine until I write to the radio, and when finished, my display goes blank so can't read the channels. All the data is transferred to the radio, but the display is blank? Anyway, am looking for information on this particular problem. Will get back to you if I have any luck finding programming info. Are you using a pc or programming from the keypad?

Dave
buford
Posts: 8
Joined: Mon Apr 13, 2009 5:38 am

Re: RMV25 Programming

Post by buford »

robson wrote:I recently bought a rmv50 and agree about the programming manual, though very similar procedure to the handheld 599A+. I use a pc to program the handhelds, and am trying to do this with the rmv50. Everything works fine until I write to the radio, and when finished, my display goes blank so can't read the channels. All the data is transferred to the radio, but the display is blank? Anyway, am looking for information on this particular problem. Will get back to you if I have any luck finding programming info. Are you using a pc or programming from the keypad?

Dave
viewtopic.php?f=18&t=3544
Post Reply