RM800 15 pin connector

Forum dedicated to discussion on RELM/Regency/Wilson Radio products
Post Reply
tteer
Posts: 2
Joined: Sun Jun 01, 2008 6:53 pm

RM800 15 pin connector

Post by tteer »

looking for the pinout of the 15 pin connector on the back of the radio. I need the pin for the Ignition Sense was turned on in programming and can not power up the radio.


Thanks
Tim
dennis1znet
Posts: 6
Joined: Fri Jan 22, 2010 1:05 am

Re: RM800 15 pin connector

Post by dennis1znet »

The schematic diagram in the manual doesn't show the pin numbers. The pins are labled TXD1, RXD1, AUX5, DEO, DI, ALT, 5V, E, AUX1, AUX3, AUX4, AUX2 DTMFIO, TXD0, RXD0. If you start at the middle pin, should be pin 8, it is ground. The AUX lines are configured in the programming software.
Post Reply