vhf regency help

Forum dedicated to discussion on RELM/Regency/Wilson Radio products
Two way repair man
Posts: 83
Joined: Mon Apr 05, 2004 12:36 pm
Location: Melbourne, FL

Re: vhf regency help

Post by Two way repair man » Fri Mar 06, 2009 11:06 pm


The Regency RFH252B can only be programmed two ways. The easiest is using the Regency RFP hand held programmer. It has a multicolor ribbon cable and a gray ribbon cable with a red stripe down one side. It plugs into the inside of the radio. You might get lucky and find one on Ebay.

The other way requires a working Regency 10 channel like a RH250, or XLH250, or RU150, or the Wilson WH2510, or WU1510. You would need to be able to remove the EEProm, solder it into one of the aforementioned radios, program it and then re-install it into the RFH252.

Or I can program it for you. Assuming that the radio is in working condition, I can program and align the radio for $25 plus shipping.

If you are interested please contact me offline: billsracing2004 at juno dot com

I hope this helps.



Posts: 1
Joined: Sun Jul 24, 2011 11:05 pm

Re: vhf regency help

Post by ltw420 » Mon Jul 25, 2011 3:51 pm

any one know where u can D/L a manual for free?? i have a 10ch slant face.
i got it programed and using it as a scanner just would be nice to look at a manual to know what else it can do...

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest