xtr

Forum dedicated to discussion on Midland Radio products. (Questions/Instructions about modifing CB radios are prohibited)
Post Reply
mash4077
Posts: 17
Joined: Mon Feb 10, 2003 7:30 pm
Location: ky

xtr

Post by mash4077 »

Hello--Anyone have ric schematic for a couple of xtr radio's--I really need
any Help will be greatly appreciated-thank you-mk :lol:
ke4dude
Posts: 1
Joined: Thu Apr 03, 2003 4:58 pm

Post by ke4dude »

email me i'll see if i can dig it up for you, i have all the xtr stuff. maybe you can help me, i need a programmer w/cable.


peace
User avatar
n_zero_ndp
Posts: 389
Joined: Sun Feb 24, 2002 8:10 pm
Location: Where P25 Trunking is KING

Post by n_zero_ndp »

vercomm
Posts: 3
Joined: Tue May 11, 2004 12:19 am

Post by vercomm »

There is a guy in Vancouver that sells these cables. I have bough one and it works great.

He is on ebay:
http://cgi.ebay.ca/Midland-VHF-UHF-Mobi ... dZViewItem

His ID is *rfguys*

Hope this helps
Birken Vogt
Posts: 29
Joined: Tue Nov 15, 2005 12:37 pm

Post by Birken Vogt »

I made one from a MAX232 chip and a serial port extension cable from an old ISA card that fits the connector on the Midland. I have been using it for some years now and I have also made it work to program Minitor III/IV pagers, and probably Vs too

Birken
User avatar
KF4SQB
Posts: 166
Joined: Tue Dec 16, 2003 12:42 am
Location: Moultrie GA

Post by KF4SQB »

Are you asking for a RIB cable schematic? If so, it can be found here: [img]http://ratlodge.com/batlabs/albums/user ... 06/Midland 70-1308A.jpg[/img].

(BBCode doesn't seem to be working properly at the moment, so you may have to copy and paste the link.)
Brett Kitchens
KF4SQB

kf4sqb "at" wetsnet "dot" com

Of all the things I've lost, it's my mind I miss the most.......
Birken Vogt
Posts: 29
Joined: Tue Nov 15, 2005 12:37 pm

Post by Birken Vogt »

Here's the simple one I use on Midland radios and also Minitor IIIs and IVs.

Image

Birken
User avatar
KF4SQB
Posts: 166
Joined: Tue Dec 16, 2003 12:42 am
Location: Moultrie GA

Post by KF4SQB »

Yeah, that's the circuit I designed mine around. I simply made a few improvements to it.
Brett Kitchens
KF4SQB

kf4sqb "at" wetsnet "dot" com

Of all the things I've lost, it's my mind I miss the most.......
Post Reply