GE/Ericsson MPA Radio Backlight.

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
User avatar
Johnny Galaga
Posts: 7
Joined: Thu Aug 01, 2002 11:40 pm

GE/Ericsson MPA Radio Backlight.

Post by Johnny Galaga »

I have an 800 MHz MPA EDACS system model. Does anyone know how to make the backlight stay on ? Is there at least some way to increase the time-out length ? Thanks.
User avatar
vcaruso
Posts: 110
Joined: Mon Jan 21, 2002 8:00 pm
Location: Passaic County, NJ

Post by vcaruso »

In the MPA RSS there is a colomn by each frequency or mode that is titled lit if you want the back light to go one with the selector or key press set it to Y (with the tab key) as for a duration on the back light there is no setting on PTT it will stay on and during channel or mode selection it will only stay on for about 3 seconds.

hope this helps
User avatar
Johnny Galaga
Posts: 7
Joined: Thu Aug 01, 2002 11:40 pm

Post by Johnny Galaga »

See, that's what sucks. The backlight only stays on for like 2 seconds. Do you mean that if I press the PTT it will stay on ?
User avatar
vcaruso
Posts: 110
Joined: Mon Jan 21, 2002 8:00 pm
Location: Passaic County, NJ

Post by vcaruso »

Same with the PTT 3 seconds.
Post Reply