Orion dashmount conversion to remote mount (Scan to System)

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
Johnny Grep
Posts: 9
Joined: Wed Apr 23, 2003 10:29 pm

Orion dashmount conversion to remote mount (Scan to System)

Post by Johnny Grep »

Hi,

I'm trying to see if it is possible to convert a GE Orion dashmount Scan radio to a remote mount System head radio...?

Can it be done with ProGrammer and a simple upgrade kit or am I out of luck?

Thanks
Prospect63
Posts: 31
Joined: Tue Apr 24, 2007 9:57 am
Location: Upstate, NY

Re: Orion dashmount conversion to remote mount (Scan to System)

Post by Prospect63 »

Very easy. Never done it with an Orion, but I have with a few MDX's. No need to change anything in ProGrammer. Just get the kit (hope you have good luck or deep pockets) and swap it over. Here's a brochure with info and model numbers on the remote-mount kit. Like I said, these aren't exactly falling out of trees...but with enough searching you might get lucky. Or just get out the checkbook and call up Harris.

Either way, good luck!

http://www.bultronic.net/documents/Acce ... _Jan07.pdf
I used to be Prospect62
motastro1
Posts: 17
Joined: Sun Dec 14, 2003 9:06 pm

Re: Orion dashmount conversion to remote mount (Scan to System)

Post by motastro1 »

Call New London Technology at (434)-525-0068 and ask for Randy. They have all the parts to remote mount an Orion from dashmount. I got all my parts from them with no problems at all.
Post Reply