MA-COM M7100

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
jim202
Posts: 120
Joined: Sat Mar 29, 2003 9:47 am
Location: New Orleans region

MA-COM M7100

Post by jim202 »

Does anyone have a good sheet that has all the pin (cable) connections for the different connectors on the radio. Many of the sheets I have seen provide cable wire colors only and not the functions.

Also looking for the programming cable diagram that uses the small DB connector that is a high density 15 pin connector in a DB-9 size.

Please contact me at jimszal at hotmail dot com and thanks for the effort.

Jim
jim202
Posts: 120
Joined: Sat Mar 29, 2003 9:47 am
Location: New Orleans region

Re: MA-COM M7100

Post by jim202 »

I am mistaken, the program cable uses the DB-37 connector on the back of the radio.

Anyone have that cable information to make a programming cable?

Jim
RadioLid
Posts: 2
Joined: Mon Nov 01, 2010 1:10 am

Re: MA-COM M7100

Post by RadioLid »

Jim,

has anyone help you with this yet?

Sam
User avatar
n_zero_ndp
Posts: 389
Joined: Sun Feb 24, 2002 8:10 pm
Location: Where P25 Trunking is KING

Re: MA-COM M7100

Post by n_zero_ndp »

Don't know if this is common knowledge yet or not, but here is the HD15 to DB9 programming cable
that works with late model control cables for M7100:


Image

I made one of these about 4 years ago and it works just fine......
BTW: It is ribless
Post Reply