Orion Programming cable diagram

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
jim202
Posts: 120
Joined: Sat Mar 29, 2003 9:47 am
Location: New Orleans region

Orion Programming cable diagram

Post by jim202 » Thu Jun 10, 2010 11:49 am

Does anyone have a PDF of the correct programming cable for an Orion? I believe that the one on the Hall site is missing a couple of resistors and a jumper to make it work.

I thought I had a diagram, but can't seem to locate it.

Jim

jim202
Posts: 120
Joined: Sat Mar 29, 2003 9:47 am
Location: New Orleans region

Re: Orion Programming cable diagram

Post by jim202 » Thu Jun 10, 2010 12:44 pm

OK, found my diagram. Info for those that are still using the GE interface box, with a few mods to the programming cable, you can plug the cable directly into your serial port of your computer. Don't need the interface box for this radio any more.

Jim



DB37 - - - - - - - - - - - - BD9

2 120 ohm resistor - - 3 RXD

3 120 ohm resistor - - 2 TXD

7 - - - - - - - - - - - - - - 5 GND
7 diode cathode
8 diode anode
8 100 ohm resistor
25 other end of 100 ohm resistor

6 - - - - - - - - - - - - - 7 RTS

20 - - - - - - - - - - - - 8 CTS

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest