GE Delta SX w/ S950 Head HELP

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
cmckenna
Posts: 1
Joined: Tue Jun 26, 2012 1:16 pm

GE Delta SX w/ S950 Head HELP

Post by cmckenna »

Greetings all,

My first post here and I am hoping someone can help me out. I have a GE Delta SX with a S950 control head that is having an annoying issue.

Everything on the radio is working except the ability to change channels. I have about 7 different frequencies programmed in this radio and if I have it on scan it will receive on all of them. I just can not change the channel. Anytime i try it always goes right back to channel 1.

I have rung out the control cable at both ends and have no open wires, have reseated any connectors, chips etc that I can but still no joy. Not sure where to go from here in the troubleshooting.

Any help is appreciated !
Post Reply