Need PC COMMAND V2 Protocol Details

Forum dedicated to discussion on Icom Amateur Radio products
Post Reply
p.tyers@bigpond.com
Posts: 1
Joined: Tue Dec 10, 2019 2:05 am

Need PC COMMAND V2 Protocol Details

Post by p.tyers@bigpond.com »

Can anyone provide me with details of the ICOM PC COMMAND V2 protocol which unfortunately is not CI-V as I was led to believe

It appears to produce strings like
<STX>*GET,MCH,SEL<ETX> hex 02 2A 47 45 54 2C 4D 43 48 2C 53 45 4C 03
and
<STX>*SET,UI,PTT,ON<ETX>
and
<STX>*SET,UI,PTT,OFF<ETX>

sentences always start with <STX>* hex 02 2A and end with <ETX> hex 03

but I need an expanded set of commands and responses.

Project is to interface an OMNITRONICS IPR400 VOIP modem to an ICOM IC-801E marine set. The OMNITRONICS produces the PC COMMAND V2 stream and I will be using a Raspberry Pi (or similiar) to convert that to NMEA compatible sentences to control the Icom 801E.

Any pointers appreciated

Peter Tyers
VK3KTS

Post Reply