Programming Cable for Kenwood TK-330

Forum dedicated to discussion on Kenwood Amateur Radio products

Moderator: willbartlett

Post Reply
Dsm85
Posts: 1
Joined: Thu Dec 18, 2008 1:49 am

Programming Cable for Kenwood TK-330

Post by Dsm85 »

I was wondering where could i purchase a programming cable at for this radio can't find one anywhere because my old programming cable won't write the data to the radio just reads it any help would be appreciated.
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: Programming Cable for Kenwood TK-330

Post by ka7wnf »

Maybe check for a broken wire in your cable or the connector. Finding another one will be tough. I had a TK330 and had to build a cable for it.
Andy Brinkley
Posts: 68
Joined: Tue Jun 03, 2003 8:23 pm
Location: North Carolina

Re: Programming Cable for Kenwood TK-330

Post by Andy Brinkley »

Make sure you are using a very slow computer (286 is preferred). If you are using a faster computer you can read but can't write back to the radio.
Andy

--------------------------------------------------------------
NC Certified Firefighter III / EMT-A
FCC Licensed Technician / Amateur Call NC4AB
http://www.brinkleyelectronics.com
Post Reply