KPG-4 Schematic

Forum dedicated to discussion on Kenwood Commercial Radio products

Moderator: willbartlett

User avatar
KF4SQB
Posts: 166
Joined: Tue Dec 16, 2003 12:42 am
Location: Moultrie GA

Re: KPG-4 Schematic

Post by KF4SQB »

I can send you a copy of the KPG-22 schematic if you'd like, but you'll have to find longer than normal phone plugs, and I have no idea where to find any such. Speaker/mic cables don't have the necessary contacts. If you'd still like the schematic, let me know.
Brett Kitchens
KF4SQB

kf4sqb "at" wetsnet "dot" com

Of all the things I've lost, it's my mind I miss the most.......
bd30907
Posts: 3
Joined: Sun Dec 07, 2008 12:55 pm

Re: KPG-4 Schematic

Post by bd30907 »

Brett, Thanks, you can send it to wdickerson@mindspring.com.

I have been in electronics a long time, I think I might have a plug.

Thanks again.

Bill D
User avatar
Canadsks
Posts: 6
Joined: Tue Aug 17, 2004 5:38 pm

Re: KPG-4 Schematic

Post by Canadsks »

Is it possible to post the pics again of this programmer?
User avatar
KF4SQB
Posts: 166
Joined: Tue Dec 16, 2003 12:42 am
Location: Moultrie GA

Re: KPG-4 Schematic

Post by KF4SQB »

Due to some computer problems here, I'm not sure if I even have this schematic in an electronic format anymore. I'm pretty sure I have hard copy somewhere, but I'm in the process of rearranging everything right now, and don't know for sure where it might be. After things settle down a little around here, I plan to see if I can get the pic links fixed (the site they were originally hosted on no longer exists).
Brett Kitchens
KF4SQB

kf4sqb "at" wetsnet "dot" com

Of all the things I've lost, it's my mind I miss the most.......
User avatar
Canadsks
Posts: 6
Joined: Tue Aug 17, 2004 5:38 pm

Re: KPG-4 Schematic

Post by Canadsks »

Sounds fair.
User avatar
Canadsks
Posts: 6
Joined: Tue Aug 17, 2004 5:38 pm

Re: KPG-4 Schematic

Post by Canadsks »

Any luck yet?
User avatar
KF4SQB
Posts: 166
Joined: Tue Dec 16, 2003 12:42 am
Location: Moultrie GA

Re: KPG-4 Schematic

Post by KF4SQB »

Does anyone who downloaded this schematic while it was still up, or anyone I sent it directly to, still have a copy? Due to computer problems over the years, I seem to no longer have a copy of it. If someone can send me a copy, I'll fix the image link so that it shows up again.

BTW, do you have any idea how embarrassing it is to have to ask for my own schematic? :oops: :roll:
Brett Kitchens
KF4SQB

kf4sqb "at" wetsnet "dot" com

Of all the things I've lost, it's my mind I miss the most.......
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: KPG-4 Schematic

Post by ka7wnf »

I don't have yours but I have some others I could email to you if yours doesn't resurface.
Post Reply