Page 1 of 1
tk-730/830 Squelch adjustment
Posted: Fri Oct 27, 2006 10:08 pm
by beaujo_fire
Can someone tell me where and how I can adjust the squelch on these radios. One of them, the 830, is really loose. I looked thru the software (kpg7d) and could not find anything software related so I am guessing I either missed it or it is only hardware adjustable. If that is the case, can someone tell me how to find the adjustment pot.
Thanks
Dave
Posted: Sat Oct 28, 2006 12:02 pm
by Meatball
It's a hardware adjustment. There's a pot on the top board (if I remember right, it's back and to the left a bit). It is marked SQ or squelch.
For some reason, the squelch control on the 30 series never seemed to have much range and even tightened all the way up they usually open at .2 uV.
Posted: Sat Oct 28, 2006 3:02 pm
by beaujo_fire
Ok Great... thanks. I will open up the radio and look for it.
Dave
Re: tk-730/830 Squelch adjustment
Posted: Mon Sep 10, 2012 2:32 am
by ASA/INSCOM
With my 730 & 830 with the KCH-4 control heads one of the soft keys is programmed for squelch (SQL). If the radio is scanning lock it on one channel. You then press the SQL key, and the display will read (code ##). Rotate the right hand knob and this number will go up or down, setting the squelch level.