Kenwood TK-830G & TK-730H power cables and channel mods?
Posted: Thu Feb 01, 2007 6:43 pm
I have a Kenwood TK-730H (6 pin power plug) and a TK-830G (2 pin power plug)
Anyway, I need complete power cable sets or at least the plugs and pins for them.
I recently found out the power cable for an ICOM IC-706MKIIG radio is the same. I can get that one from Ebay for 12.88 plus 4.90 shipping. The low power 2 pin plug seems to be harder to find.
Also, the TK-730H has a X24C04P (32 channel I think) eeprom installed. To increase to 160 channels, do I just need to change the eeprom to the
X24C16P as well as the eeprom in the control head?
Also, is there a 160 channel mod such as this for the TK-830G?
Lots of questions, few answers:-)
Thanks,
RoD
Anyway, I need complete power cable sets or at least the plugs and pins for them.
I recently found out the power cable for an ICOM IC-706MKIIG radio is the same. I can get that one from Ebay for 12.88 plus 4.90 shipping. The low power 2 pin plug seems to be harder to find.
Also, the TK-730H has a X24C04P (32 channel I think) eeprom installed. To increase to 160 channels, do I just need to change the eeprom to the
X24C16P as well as the eeprom in the control head?
Also, is there a 160 channel mod such as this for the TK-830G?
Lots of questions, few answers:-)
Thanks,
RoD