I have a TK-7180H and a TK-880H. I want to put the both on Ham Frequencies.
I have KPG-49H software that with a RS232 to TTL adapter that I modified by adding a MMJ connector
work fine with the TK-880H I can read and write data to the radio.
I have the KPG-96D software for the TK-7180H. I have selected the TK-7180H in
one of the drop downs but when I try and read the data from the radio I get and error message
stating " Model name and Market code".
I tried the TK-7180H with the KPG-89D software too and got the same error message.
Any help would be appreciated
Thanks
Ken
TK-7180H
Moderator: willbartlett
Re: TK-7180H
I have never seen that error!
Was/is the radio working as is?
Did it come from someone who possibly screwed up the programming?
You can try starting from scratch,write a program with the model that the radio is supposed to be,then write that to the radio,when prompted tell it to overwrite,then try reading again.
Was/is the radio working as is?
Did it come from someone who possibly screwed up the programming?
You can try starting from scratch,write a program with the model that the radio is supposed to be,then write that to the radio,when prompted tell it to overwrite,then try reading again.
Re: TK-7180H
We have run into this with different radios. If you make a file up from scratch you have to make sure that you select the x180 "K" in the model setup box. If it gives that error with reading it, I would just do like in the last post, make one up from scratch,first just fill in the first channel or 2 and then program it in. Just hit ok when any errors come up. Are you sure the radio is a "K" model anyway? There are a few N or I believe E models that are not US compliant.
Jordan,TCFD
Jordan,TCFD