MODEL STRING DECODE REQUESTS ONLY

Forum dedicated to discussion on EF Johnson Radio products such as the VP8000, VP6000, VP5000, VM7000, VM6000, radios. Support for Armada software platform.

Moderator: willbartlett

TonyAcabono
Posts: 28
Joined: Mon Jan 14, 2008 2:38 am

Re: MODEL STRING DECODE REQUESTS ONLY

Post by TonyAcabono »

Thanks boss, hopefully I can pick it up cheap and it works, but I guess if it sh--s then I am out of luck.

Intrinsically Safe wrote:
242-5112-610-G02
5100 NOT SL/Ascend
VHF
NON IS Model II
VHF Wideband Antenna (136-174)
Non IS Battery
Black Housing
Analog/P25 Conventional
P25 Trunking
SmartNet
SmartZone
Star (Omnilink)
Digital SN/SZ
P25 DES-OFB
AES
Conv OTAR
P25 Trunking OTAR
512 Channels

This is a series 2 legacy radio that is no longer supported by EFJ

I.S.
TonyAcabono
Posts: 28
Joined: Mon Jan 14, 2008 2:38 am

Re: MODEL STRING DECODE REQUESTS ONLY

Post by TonyAcabono »

242-5216-660SL4

preemptive thank you
User avatar
Intrinsically Safe
Posts: 347
Joined: Sat Oct 13, 2007 9:19 pm

Re: MODEL STRING DECODE REQUESTS ONLY

Post by Intrinsically Safe »

242-5216-660SL4
51SL
VHF
IS-Model II
VHF Wideband antenna
IS Battery
Black Housing
Analog
P25 Conv
SmartNet
SmartZone
STAR (Omnilink)
Digital SN/SZ
512 Channels
Single Key DES/DES-OFB
MDC-1200

Series 4 (X Platform) radio
I hear it is nearing the end of its support cycle(firmware) since the series 6 radios are out (ES Platform)

I.S.
Sean Penn: Last year I went to Iraq. Before Team America showed up, it was a happy place. They had flowery meadows and rainbow skies, and rivers made of chocolate, where the children danced and laughed and played with gumdrop smiles.
sparkdo2xg
Posts: 2
Joined: Wed Apr 01, 2009 8:19 am

Re: MODEL STRING DECODE REQUESTS ONLY

Post by sparkdo2xg »

MODEL STRING DECODE please and what software do i need to program it

242-8160 avenger sk-hm83


thanks in advance
Last edited by sparkdo2xg on Mon Apr 20, 2009 7:52 am, edited 5 times in total.
Hubert Chapman
Posts: 1
Joined: Mon Apr 13, 2009 6:43 am
Location: Jacksonville,AR.

Re: MODEL STRING DECODE REQUESTS ONLY

Post by Hubert Chapman »

For #'s

242-9653

242-9883-503

Thanks
Hubert
User avatar
Intrinsically Safe
Posts: 347
Joined: Sat Oct 13, 2007 9:19 pm

Re: MODEL STRING DECODE REQUESTS ONLY

Post by Intrinsically Safe »

9653 is an LTR 800 Mhz Viking radio. I would need the last 3 digits to tell you more.

The 9883-503 is a high power(35w) 800Mhz Smartnet and/or Smartzone radio.

Both of these are no longer supported.

I.S.
Sean Penn: Last year I went to Iraq. Before Team America showed up, it was a happy place. They had flowery meadows and rainbow skies, and rivers made of chocolate, where the children danced and laughed and played with gumdrop smiles.
125
Posts: 19
Joined: Wed Apr 08, 2009 2:46 pm

Re: MODEL STRING DECODE REQUESTS ONLY

Post by 125 »

I guess I will ask as well for a 242-5117-660GS4 Thanks.
User avatar
Intrinsically Safe
Posts: 347
Joined: Sat Oct 13, 2007 9:19 pm

Re: MODEL STRING DECODE REQUESTS ONLY

Post by Intrinsically Safe »

242-5117-660GS4
5100 (not SL/Ascend)
VHF
Model III I.S.
Wideband VHF Antenna
I.S. Battery
Black Housing
Analog/Dig Conv
P25 Trunking
SmartNet/SmartZone
STAR(Omnilink)
Digital SN/SZ
DES-OFB
Keypad Programming (FPP)
512 TG
AES

Series 4 radio with limited support. I don't think they are developing any more firmware for this series but will support HW as parts are available.

I.S

I.S
Sean Penn: Last year I went to Iraq. Before Team America showed up, it was a happy place. They had flowery meadows and rainbow skies, and rivers made of chocolate, where the children danced and laughed and played with gumdrop smiles.
125
Posts: 19
Joined: Wed Apr 08, 2009 2:46 pm

Re: MODEL STRING DECODE REQUESTS ONLY

Post by 125 »

Thank you.
redbeard
Posts: 4
Joined: Sun May 29, 2005 4:53 pm
Location: Pittsburgh, PA

Re: MODEL STRING DECODE REQUESTS ONLY

Post by redbeard »

Picked up a mobile at Dayton this weekend. Cannot find much info on the net other than high tier Intruder UHF LTR-Net and Multi-Net along with conventional. This is my first EFJ so any help would be appreciated pointing me in the right direction on how to get started. I powered it up and nothing lights up but the display says E.F.J. V201 and it does nothing else. Is it just blank? Is there a test mode I can use to validate TX/RX until I figure out what I need to program it? PM only please since this is decode request only. I will post separate help thread in main area for public responses. (better for helping everyone later who are using search)

Model for feature decode is: 242-9843-232

Thanks.
willbartlett
Administrator
Posts: 85
Joined: Wed Jan 23, 2002 8:00 pm
Location: Boston, MA

Re: MODEL STRING DECODE REQUESTS ONLY

Post by willbartlett »

Hi All.

I have 2 legacy 5100 VHF. 242-5113-310-gf.

I dug through the archives and these were described as legacy radios, which is fine as they weren't that expensive.

I wanted to know if the legacy controllers supported DES in the DSP? reading the options in 1.24.00 and 1.31.1 shows identical responses, DES in one and nothing in the other. Is this possible or is this a file format conflict?

There doesn't appear to be a UCM connector or a SEM on either board. Rev number on the boards is 100.07.

What firmware can these be lifted to and will the rev available work with 1.24.0 or 1.31.1?

Thanks, Will
User avatar
Intrinsically Safe
Posts: 347
Joined: Sat Oct 13, 2007 9:19 pm

Re: MODEL STRING DECODE REQUESTS ONLY

Post by Intrinsically Safe »

Will,

Those are the series 1 radios. The encryption was software based and will support DES/DES-OFB, but NOT AES. There are no connectors to support the addition of the MOT UCM (that was the series 2 and 3). These radios are not FIPS certified if it means anything to you.
The last release for these is 1.18.15 and requires PCC 1.28.0.8

I.S.
Sean Penn: Last year I went to Iraq. Before Team America showed up, it was a happy place. They had flowery meadows and rainbow skies, and rivers made of chocolate, where the children danced and laughed and played with gumdrop smiles.
Medic511
Posts: 2
Joined: Mon Jun 08, 2009 11:08 pm

Re: MODEL STRING DECODE REQUESTS ONLY

Post by Medic511 »

I would like to know the details of the following model number:

242-5318-201AAAB4

If it helps, the s/n is:

5318H5005T38599

I know this is a remote mount, VHF. I would particularly like to know if it is narrow band (12.5 kHz) capable.

Many thanks.

de KA7GZH
flat4turbo
Posts: 60
Joined: Wed Dec 26, 2007 3:06 am

Re: MODEL STRING DECODE REQUESTS ONLY

Post by flat4turbo »

Medic511 wrote:I would like to know the details of the following model number:

242-5318-201AAAB4

If it helps, the s/n is:

5318H5005T38599

I know this is a remote mount, VHF. I would particularly like to know if it is narrow band (12.5 kHz) capable.

Many thanks.

de KA7GZH
5300 Series (not SL) Mobile
512 Channels
50w VHF (136-174) Remote Mount Drawer
Remote RS-5300 Six-Button Control Head with Mtg Bracket
P25 Digital & Analog Conventional
No Trunking
No OTAR
No Encryption

Not the full level of detail provided by other, more capable people here. ;-)

** All 5300 radios can do 12.5khz spacing.

-f4t
User avatar
Intrinsically Safe
Posts: 347
Joined: Sat Oct 13, 2007 9:19 pm

Re: MODEL STRING DECODE REQUESTS ONLY

Post by Intrinsically Safe »

Wow. I guess I am out of job. :(

Good work F4T.

I.S.
Sean Penn: Last year I went to Iraq. Before Team America showed up, it was a happy place. They had flowery meadows and rainbow skies, and rivers made of chocolate, where the children danced and laughed and played with gumdrop smiles.
Post Reply