need help 5100 series
Moderator: willbartlett
-
- Posts: 4
- Joined: Fri Aug 28, 2009 8:30 am
need help 5100 series
I am new to programming and I have a 5100series EFJ model 242-5117-660-GS2. i have the update software 2.8.15 and when i try to upgrade radio i get comunacations error, does anyone know what would cause this. any help is appreciated
Last edited by WL Firefighter on Sat Oct 31, 2009 9:20 pm, edited 2 times in total.
-
- Posts: 13
- Joined: Tue Oct 31, 2006 2:21 pm
Re: Help Please 5100 series
You are on the right track.
If you got one of the surplus AN/PRC-127's, you got one digital zone and one analog zone. You can program those to an extent, like putting in a single repeat or simplex channel, but you can't add a zone, or do any of the neater features.
For that, you need a programming cable, any decent computer, and the pcc you mentioned. You can't 'lose' options as far as I can tell, you can poll the radio to see whats' in it, but it doesn't appear to let you change them.
hard to find anything out about these radios, but I'd rather have a 5100 than an XTS5k.
-Shawn
If you got one of the surplus AN/PRC-127's, you got one digital zone and one analog zone. You can program those to an extent, like putting in a single repeat or simplex channel, but you can't add a zone, or do any of the neater features.
For that, you need a programming cable, any decent computer, and the pcc you mentioned. You can't 'lose' options as far as I can tell, you can poll the radio to see whats' in it, but it doesn't appear to let you change them.
hard to find anything out about these radios, but I'd rather have a 5100 than an XTS5k.
-Shawn
-
- Posts: 4
- Joined: Fri Aug 28, 2009 8:30 am
Re: need firmware v2.8.15 for 5100 series
Hey Shawn
thanks for the info.
thanks for the info.
Re: need firmware v2.8.15 for 5100 series
Please note that asking for firmware, programming software, etc here will result in you having your account removed.
Please refrain from this in the future. Contact an authorized dealer as they have the ability to help you out.
-Alex
Please refrain from this in the future. Contact an authorized dealer as they have the ability to help you out.
-Alex
Re: need help 5100 series
Alex,
I guess I'm confused. I didn't think he asked for any firmware or software - at least that's how I read his post. He has everything he needs, it just isn't working. Or, did I miss something???
I guess I'm confused. I didn't think he asked for any firmware or software - at least that's how I read his post. He has everything he needs, it just isn't working. Or, did I miss something???
-
- Posts: 13
- Joined: Tue Oct 31, 2006 2:21 pm
Re: need help 5100 series
Sorry Alex;
I didn't take it that way.
Shawn
I didn't take it that way.
Shawn
Re: need help 5100 series
I have seen the radios get very touchy as to the data speed you try programming the radio at. If your getting the error while trying to read the radio, try different speeds. I have some radios
that want the rate at 9600 and others that want it higher.
As I have a number of different radios and versions of software they require, I have had to put a label on each of them with the version and speed they like.
Jim
that want the rate at 9600 and others that want it higher.
As I have a number of different radios and versions of software they require, I have had to put a label on each of them with the version and speed they like.
Jim
- Intrinsically Safe
- Posts: 347
- Joined: Sat Oct 13, 2007 9:19 pm
Re: need help 5100 series
If you have to use 9600 baud then you have some of their older radios (like the REV 4 mobile) that only communicated at 9600. All of their newer ones request you use 19200 at a min.
The newer radios won't recognize 9600 at all, as if you set PCC to 9600 it defaults to looking for an older model.
I.S.
The newer radios won't recognize 9600 at all, as if you set PCC to 9600 it defaults to looking for an older model.
I.S.
Sean Penn: Last year I went to Iraq. Before Team America showed up, it was a happy place. They had flowery meadows and rainbow skies, and rivers made of chocolate, where the children danced and laughed and played with gumdrop smiles.
-
- Posts: 4
- Joined: Fri Aug 28, 2009 8:30 am
Re: need help 5100 series
thanks everyone for your info, but come to find out it was a bad programming cable that i purchased from kawamall on ebay. but thanks to the best efj and motorola programmer i have seen and his name is Steve and he is very much affordable cheapest i found and his user name is efj44astro44 his email is Cat2990@aol.com