I am new to this radio programming thing. I have an lpe-200 and i was trying to program it and I messed it up pretty bad. I have the tracking and feature data saved however I dont know what to from here on. I think that i might have to load a .bin file on there or something. Any input would be appreciated
Cheers
Ryan
Lpe-200
-
- Posts: 3
- Joined: Fri Jun 20, 2008 6:26 pm
Re: Lpe-200
If you are using the Windows version of ProGrammer you should also have Radio Maintenance. Open Radio Maintenance and click on the tab for MRK/LPE/Orion... Click Recovery and follow the procedure. You will need the proper Radio Code, DSP, Feature Code, and tracking data to do a proper recovery. How messes up is the radio. Please describe what you did and what it is doing now. I maintain fleets totalling 2000+ 800mHz LPE-200s so I have programmed a few of these.
If you cannot get the files mentioned above, especially the feature code, you will have to send the radio a M/Acom authorized service center such as the shop where I work.
Dan
If you cannot get the files mentioned above, especially the feature code, you will have to send the radio a M/Acom authorized service center such as the shop where I work.
Dan