Page 1 of 1
TK390 Programming password
Posted: Mon Jan 30, 2006 9:51 pm
by CVChief
Is there anyway to get around the read RSS password on a TK390? I bought a new one and a cable. Now I can't read the old one. I hate to think about trying to reprogram it from scratch.
Posted: Tue Jan 31, 2006 12:03 pm
by n5tbu
That is the only way I know of.
mod
Posted: Tue Jan 31, 2006 12:12 pm
by Splat
I've heard of a few back from the factory that used the serial #, or the last couple of digits of it, as the p/w. Good luck with it.
Re: TK390 Programming password
Posted: Tue Apr 17, 2012 1:06 pm
by Hambone259
I also am having trouble programing a tk390. I have the proper cable and software and when setting up for programing I see PC on the display screen. But when I try to read the radio it keeps saying the cable isn't connected or the com port is wrong. The cable is good, I am reasonably sure...and the com port and baud rate is correct. The control panel device settings even recognizes the com port and the cable plugged in.
Am I missing the a password setting somewhere? Please reply and email to
adinserter@hotmail.com.
Re: TK390 Programming password
Posted: Tue Apr 17, 2012 4:49 pm
by Splat
Unless you can try the cable on another radio you can't be certain it's OK. I would try another baud rate, if you can, but if your Com port and baud rate are good then it's either the cable or the radio.