Page 1 of 1
TK630H part number?
Posted: Fri Jun 02, 2006 7:55 pm
by Bob
Anyone have the part number for the TK630H? Just bought a 630, but it was missing the main power cable.
Posted: Mon Jun 05, 2006 1:22 pm
by Bob
Anyone? Is it the same cable as the 730H and 830H?
cable
Posted: Mon Jun 05, 2006 4:28 pm
by ka7wnf
I don't know the number but there is a work around if you can't find one. My 630H had the connector removed and new wires were connected right to the board. They are screwed on so it's an easy mod. I use an Anderson Powerpole connector on the wires.
Posted: Mon Jun 05, 2006 4:58 pm
by n5tbu
The Kenwood ham hf rig powercords are the same such as a Ts 440,call HRO or AES and ask them.
mod
Posted: Tue Jun 06, 2006 9:53 pm
by Meatball
It is the same power cable as the TK-730H/830H.
Posted: Tue Jun 06, 2006 9:58 pm
by n5tbu
Yes,it's been covered ,all the 30 H radios use the same powercord as the Kenwood 100 watt HF rigs,the 30 series lowpower(no H in the model)use a cheap cable from Kendoo.com.
mod
KENWOOD CABLE 630-H
Posted: Wed Jun 14, 2006 7:44 pm
by JA1
for tk 630-h part number kct-17 remote mount/ dash mount. kct-15. for low power [dash kct-14] for high power dash kct-15. all kenwood part number's. hope this help's.