The Radio Information Board

Your information sounds good I have also the delta sw and I compared the hex file generated... I'll try this way to modify the data before to upload in the eeprom. Thanks again!

The "reverse burst" is an old idea and it was widely used with old ctcss decoders. Most of the recent decoders integrated in the amateour radios does not respond correctly to the phase change of the STE function, so you get the squelch noise + tx delay! I would like to set the STE only whe...

Thanks for your answer: now I understand! For sure that's the function I need to eliminate, but... unfortunately on the edacs1 programmer I can't see anything that could help. I'll continue serching if there is any setup to kill the ste option!

Point 1 solved by myself... It's the "microphone off hook switch" function! The rx tone decoding woks only when is supposed that you don't have the microphone in your hands! If you press the small switch on the back of the microphone, you'll hear the channel communications only if the corr...

Thanks for your answer... for me was important only the ability to set the 12.5 spacing frequencies, even if the RX is really 25khz wide.

I tryed and can confirm that it's possible to set frequencies like 4xx.012.5

Dear all! I have a ranger UHF with S850 control head, succesfully modified for amateour radio bands. The only things still not working, that I can't find the way to solve are the following: 1. even if I set (EDACS1 programmer) the channel guard tone in RX on the frequency list, the squelch open with...

Hi all! I have the opportunity to get some Ericsson GE Ranger radios. The model is the UHF (450-470Mhz) probably used on motorcycles. I'll need to program them on frequencies like 4xx.512.5 (12.5 khz step), is it possible in any way (also hw mods)? Or you can only set 4xx.500 or 4xx.525 and so on? :...