Page 1 of 1
TK-730 Display error
Posted: Wed Mar 22, 2006 8:19 am
by palm
I bought a used TK-730 in a garage sale. When I turned it on, the display showed all the signs were on and the TX looked in black background...? I don't have a clue on what is happening... - T tried also programming it but didn't work.
HELP !
730
Posted: Wed Mar 22, 2006 7:52 pm
by ka7wnf
please provide as much info as you can. does the radio work at all? Do all the characters light up and stay that way?
Posted: Wed Mar 22, 2006 9:30 pm
by palm
Thanks ka7wnf !
does the radio work at all? Do all the characters light up and stay that way?
Well.. the radio doesn't work, actually it does nothing but change to PG mode... and all the characters light up and stay. In addtion the IC108 is not in its socket... Should it still work?
I tried to programming it with a home made KPG-4 ,which works fine with other equip., but the PC shows ERROR... Retry or Cancel?
IT has de KHC3 panel, a X24C04P ic and the jumper between pin 9 and 12 in the rear connector.
730
Posted: Wed Mar 22, 2006 10:34 pm
by ka7wnf
Is that the 24 pin socket?
Posted: Wed Mar 22, 2006 10:42 pm
by Meatball
I've seen this happen to TK-730's where the radio's CPU will not boot up due to bad programming/firmware or an issue with the CPU itself. The micro is being held in reset.
If IC108 is the firmware chip (40 pins, left front of the radio topside) and it's missing, the radio will have no firmware and will not boot. You need an FAA EEPROM (single head) to go in that socket before the radio will boot up.
730
Posted: Tue Mar 28, 2006 11:20 pm
by ka7wnf
Hey Palm, did you ever get it to work?
No it didn't !
Posted: Wed Mar 29, 2006 7:17 am
by palm
Since I bought it, three weeks ago, It never worked. I think that is a microprocessor problem, buy I don't have a clue on how to fix it. I tried to find more info about the chip or the eqip but I didn't find something related.
Any other help will be apreciated.
730
Posted: Wed Mar 29, 2006 10:14 am
by ka7wnf
You mentioned IC-108 was missing. Is that the 8 pin or the 24 pin IC? If either one is missing it won't work. But it's an easy fix. The 8 pin is the memory chip and the 24 pin is the firmware chip.
Posted: Thu Mar 30, 2006 7:37 pm
by Meatball
IC108 is the 28 pin firmware PROM, which is missing. We have a junked TK-830 in the shop and I checked the socket designation.
IC109 is the X24C04P EEPROM.
Your radio is missing it's firmware; it has no operating code (which would explain why it's brain-dead!)
The chip is usually marked "FAA" for single head radios.
Solved !
Posted: Mon Jun 05, 2006 1:54 am
by palm
Okay ! The problem is solved. I've bought a firrmware chip amd now the equip is back to life !!
Thanks everybody !
730
Posted: Mon Jun 05, 2006 12:38 pm
by ka7wnf
That's good news. If you need any more help just let us know.