Page 1 of 1
90 Series mobile pinout
Posted: Thu Feb 21, 2008 6:20 pm
by rwo978
Anyone have a scan of the pinout for the back of the control head and the back of the deck for the 90 series? Just got a DB and the speaker is coming off the control head, want it out the back of the radio.
Also, any other literature on this radio would be nice. Made the jump from the 30s, which I have studied up on. Now I need to start all over.
Re: 90 Series mobile pinout
Posted: Thu Mar 27, 2008 9:07 am
by kingpin
Did anyone ever send you this info? I have the service manual here if you still need the pinout.
Re: 90 Series mobile pinout
Posted: Fri Mar 28, 2008 8:49 am
by rwo978
No, but I managed to dig enough on the net and found the pinout for the speakers, so it's working as I wanted.
Re: 90 Series mobile pinout
Posted: Fri Mar 28, 2008 3:12 pm
by kingpin
Here's some pinouts for your library:
This is the 12 pin connector on the back of the remote control head.
01 - Ignition Sense Input
02 - 13.4 V out
03 - Ground
04 - Mic Input Signal
05 - Mic Ground
06 - Aux Input 1
07 - Aux Input 2
08 - Aux Output 1
09 - Aux Output 2
10 - Remote Speaker Output
11 - Remote Speaker Output
12 - No Connection
Microphone Connector (Clockwise from top 12:00)
01 - SB
02 - Hook
03 - Mic Ground
04 - Mic Input
05 - Ground
06 - TRD
07 - N/C
08 - DM
09 - BLC
10 - PTT
11 - N/C
12 - N/C
9 Min Connector on rear of RF Deck
01 - Ignition Sense
02 - Speaker Output
03 - Remote Speaker Input
04 - Horn Relay 2
05 - Horn Relay 1
06 - Speaker output
07 - PA Speaker Output
08 - PA Speaker Output
09 - Ground