Page 1 of 1
TK-830(G) Programing
Posted: Sun May 23, 2010 4:05 am
by CDX825
Just wondering what software I need to program a TK-830(G)
Re: TK-830(G) Programing
Posted: Sun May 23, 2010 12:01 pm
by ka7wnf
KPG-7D.
Re: TK-830(G) Programing
Posted: Mon May 24, 2010 2:44 am
by CDX825
Whats the newest version and where can I find it?
Thanks!
Re: TK-830(G) Programing
Posted: Mon May 24, 2010 9:40 am
by ka7wnf
Just do a Google search. You might find a dealer that still sells it. I beleive 2.01 is the version. There were only 2. Version 1 had some flaws but you can't even find it now.
Re: TK-830(G) Programing
Posted: Mon May 24, 2010 9:40 am
by ka7wnf
Just do a Google search. You might find a dealer that still sells it. I beleive 2.01 is the version. There were only 2. Version 1 had some flaws but you can't even find it now.
Re: TK-830(G) Programing
Posted: Mon May 24, 2010 9:40 am
by ka7wnf
Just do a Google search. You might find a dealer that still sells it. I beleive 2.01 is the version. There were only 2. Version 1 had some flaws but you can't even find it now.
Re: TK-830(G) Programing
Posted: Mon May 24, 2010 7:41 pm
by CDX825
Okay Ive got it.
I was under the assumption that the G radios did narrow band. I dont see anything in the software that would suggest that. I must be missing something?
Re: TK-830(G) Programing
Posted: Tue May 25, 2010 9:26 am
by ka7wnf
Under Model select radio type and keep going until you see a screen that shows the frequency ranges. The last 5 lines will show W/N. If you select one of those it will allow wide and narrow programmed in on a per channel basis. The SP tune will allow out of band programming. If you PM me your email address I can send you the programming manual.
If you read a radio and it doesn't show as W/N then it will need to be redone from scratch.
Re: TK-830(G) Programing
Posted: Fri May 28, 2010 4:05 am
by CDX825
Got your email and figured things out. Thanks!!
Re: TK-830(G) Programing
Posted: Thu Sep 22, 2011 12:29 pm
by Garyf629
ka7wnf wrote: If you read a radio and it doesn't show as W/N then it will need to be redone from scratch.
What do you mean "Then it will need to be redone from scratch."
Thanks
Re: TK-830(G) Programing
Posted: Sat Oct 01, 2011 12:28 pm
by ka7wnf
You will need to write a new file. The radio has to be told it's a W/N capable radio in the initial settings. Just like you need to tell it what frequency and band split it is. Hope this helps.