Decoding LPE-200 info

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
User avatar
apco25
Posts: 49
Joined: Sat Jan 11, 2003 2:13 pm
Location: Amundsen-Scott South Pole Station

Decoding LPE-200 info

Post by apco25 »

Could someone decode this info obtained from an LPE-200? Of course its 800 and EDACS, but what features are enabled with this flash.

Options: 04 08 23 24


Chvchn# 5535


Sys Grp 5535 255


Feat Data 1: 01da097a670c


Feat Data 2: 298523e32586


Feat Data 3: 93c800000000


DSP Ram: k2r02901


Flash: p11205b00


HSD Rate 9.6k


Pers Version: 22.00


E Prom Siz 2k


Ram 32k


Flsh 512k


800 Mhz


Ericsson 1996
Glen W Christen
Posts: 46
Joined: Mon Feb 03, 2003 12:46 pm

All EDACS features

Post by Glen W Christen »

01=Conv Mode Pri Scan 02=EDACS 3 Site Sys scan 03= Public Address Operation 04=EDACS group scan 05=EDACS Sys Pri Scan 06=ProSound/ProsScan 07=EDACS Dynamic Regroup oper. 08=EDACS Emergency oper. 09=Type 99 Encode 10=Conv Emer Oper 11=RF Preamp enable 12=AEGIS digital voice 13=VGE encryption 14=DES encryption 15=VGS or User Specified encryption 16=Mobile DATA 17= EDACS status/message 18=Test unit enable 21=alternate language 22=Over the air Personality Programming (ProFile) 23= Narrow band 12.5 Channel spacing 24=Auto Power control 28=Multiple radio Prosound 29=Provoice oper 30=LPE50
Post Reply