I have a tk-3160 and the knob will only go to channel 5 without forcing it. Is there a mechanical stop under there that the dealer or prior owner installed? If so how do you remove it?
Thanks in advance
tk-3160 channel knob
Moderator: willbartlett
-
- Posts: 6
- Joined: Thu Apr 22, 2010 4:53 pm
Re: tk-3160 channel knob
shouldn't there be a stopper. but to check, you gonna have to remove the case. to do this:
1. unscrew the 2 chassis screws
2. pull out on/off knob
3. remove front case assembly
4. pull out ch knob, should see a white plastic spacer under the ch knob.
hope this helps.
1. unscrew the 2 chassis screws
2. pull out on/off knob
3. remove front case assembly
4. pull out ch knob, should see a white plastic spacer under the ch knob.
hope this helps.