Now what...

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
Prospect62

Now what...

Post by Prospect62 »

OK, I got the cables and am powering the S825 through the J1 connector, more specifically pins one (1) and eleven (11). Pin one being the ground and pin eleven being the power. When power is applied, the head makes a buzzing noise and some of the lights on the head come on very dimly. The display does not come on. It appears to me like something is VERY wrong. Is this head shot or what? Can anybody help? Thanks. :evil:
Top
User avatar
n_zero_ndp
Posts: 389
Joined: Sun Feb 24, 2002 8:10 pm
Location: Where P25 Trunking is KING

Re: Now what...

Post by n_zero_ndp »

Prospect62 wrote:OK, I got the cables and am powering the S825 through the J1 connector, more specifically pins one (1) and eleven (11). Pin one being the ground and pin eleven being the power. When power is applied, the head makes a buzzing noise and some of the lights on the head come on very dimly. The display does not come on. It appears to me like something is VERY wrong. Is this head shot or what? Can anybody help? Thanks. :evil:
Dan...

Hopefully nothing is wrong with it :(
Here is the power wiring scheme for the S-8xx control head:

Image
Top
Prospect62

Post by Prospect62 »

OK. Following that diagram I get the same results. A buzzing noise from the head and some of the lights come on very dim. I tested my wiring setup against another 825 head and it works fine. So I guess I have myself a smoked head. Which sucks because I have everything ready to go and now no head. Does anybody have one they are looking to get rid of? Does anybody want this piece of crap? Thanks for the help anyways.
Top
Post Reply

Return to “Harris Public Safety Communications (PSPC) Equipment”