OK folks, reasearching a bit more. the pin out sayas for th horn Alert that it can be moded for other functions, I found a tech note form pyramid that shows me how to extract data audio thanks to someone can't remember who that pointed me over to a voice mode for a repeater there.
anyhow for pin 10 and 11, it is horn alert, if you do not use kck-5 another function could be output to this pin after special modifications.
I can;t seem to locate a KCK-5 info, I am assuming that they mean KCH coudl soemone confirm this...
thanks
Will
TK-x30 Serive manual, Pin Outs
Moderator: willbartlett
Kck-5. Card interphase of DTMF and 2 tones with relay to activate the horn. (it does not include decoder). For Series 30 moving bodies
well there is my answer in spanish only google translator.
so if I cam going to mod the radio with the two jumpers for audio input to the tone pot as well as the COS from the IC should I then try and find one of the adapter boards and make the calbe, or jsut soder right on to the pin is self?
thoughts???
Will
well there is my answer in spanish only google translator.
so if I cam going to mod the radio with the two jumpers for audio input to the tone pot as well as the COS from the IC should I then try and find one of the adapter boards and make the calbe, or jsut soder right on to the pin is self?
thoughts???
Will