Anybody know which pot inside the FTL-7011 mobil
radio is used to adjust the squelch?
Thanks,
FTL-7011 squelch setting
FTL-7011 squelch setting
Pete
K2XM
Saco, Maine
K2XM
Saco, Maine
Set signal genreator for 0.2 uv output @ 3.3 Khz Dev.
Turn VR1001 (Squelch) fully counterclockwise. Squelch will open.
Turn VR1001 (Squelch) clockwise wise on the MAIN UNIT so the squelch just closes and then counterclockwise very slowly until the squelch opens.
Turn off signal from RF signal generator output and then turn varify that it does open.Check to see if squelch opens.
If not, turn VR1001 (Squelch) very slowly counterclockwise until squelch opens.
You may have to do this a few times “ ON/OFF†from signal generator until you have the squelch opening with the 0.2 uv signal input. @ 3.3 Khz Dev.
Turn VR1001 (Squelch) fully counterclockwise. Squelch will open.
Turn VR1001 (Squelch) clockwise wise on the MAIN UNIT so the squelch just closes and then counterclockwise very slowly until the squelch opens.
Turn off signal from RF signal generator output and then turn varify that it does open.Check to see if squelch opens.
If not, turn VR1001 (Squelch) very slowly counterclockwise until squelch opens.
You may have to do this a few times “ ON/OFF†from signal generator until you have the squelch opening with the 0.2 uv signal input. @ 3.3 Khz Dev.