Page 1 of 1
Kenwood TK 730 Scanning issues
Posted: Fri May 09, 2008 1:23 pm
by shar
Hello,I have aquired a TK730 radio capable of 160 channels.Able to program freqs,buttons etc but the scan buttons do not function .The radio has a remote head and a KRK4db box X 2.The programming is set for 160 cannels,sinlge head,dual band and the right freqs.scan is turned on with mike off hook.Any suggestions would be appreciated
Re: Kenwood TK 730 Scanning issues
Posted: Fri May 09, 2008 8:59 pm
by Andy Brinkley
Have you set up a scan list?
You can either do it via the programming software or program a key for "D/A" to set up the list. Pressing the "D/A" key toggles the channel in and out of the scan list.
The Off Hook Scan option should be set to "YES" to allow scanning.
Re: Kenwood TK 730 Scanning issues
Posted: Mon May 12, 2008 8:52 am
by shar
Hello,Thanks for the comeback.It turned out that I needed version 2.1 of the software to get the radio to scan properly.The 1.0 version did not seem to allow the scanning to work even though programmed to do so.