Kenwood TK 730 Scanning issues

[shar]

Hello,I have aquired a TK730 radio capable of 160 channels.Able to program freqs,buttons etc but the scan buttons do not function .The radio has a remote head and a KRK4db box X 2.The programming is set for 160 cannels,sinlge head,dual band and the right freqs.scan is turned on with mike off hook.Any suggestions would be appreciated

[Andy Brinkley]

Have you set up a scan list?

You can either do it via the programming software or program a key for "D/A" to set up the list. Pressing the "D/A" key toggles the channel in and out of the scan list.

The Off Hook Scan option should be set to "YES" to allow scanning.

[shar]

Hello,Thanks for the comeback.It turned out that I needed version 2.1 of the software to get the radio to scan properly.The 1.0 version did not seem to allow the scanning to work even though programmed to do so.